Apr 202109Fri

Packaged Foxdale Gold

SG 1.014 4.0℃ beer-gun bottling kegging

Took just over 24 hours to get from room temperature down to 4.0 ℃ in the brew fridge. I had that dialled to ‘med’ for the first half and then just below ‘max’ for the second as I didn’t want to freeze the 19 litre keg of Golden Wave that was already in there, nearing the end of it’s conditioning phase. Three days later I’m ready to put this, my third extract brew, into final packaging.

I don’t want to tie up both 5 litre mini kegs and also put some bottles away to share, so it makes sense to try and guess the number of bottles I could fill while also using as much of one keg as possible. In the end I went for 8 x 500 ml silver crown-caps and hoped for a nearly-full keg to allow room for carbonation, but realistically kegged somewhere between 3.5 and 4 litres.

For the bottles I used the Blichmann Beer Gun again, and thinking about it this may have been it’s first outing with actual beer. I set the SS Brewtech Mini Bucket onto the lab platform (plastic palette over the bath) and relied on gravity to pull liquid through my Bouncer filter from the bucket’s spigot and into the beer gun. Even with this modest drop in elevation the flow was enough. Gas was routed to the beer gun via one ⅜ line with another feeding Bag Thing on top of the bucket behind a John Guest tap and T-piece. Absolutely no flaws in setup here; both gas and liquid being delivered efficiently even if I did forget to purge the filter with CO2 before starting. Oops. Each bottle was primed with 5 ml of dextrose – conveniently using a baking measuring utensil I found in the kitchen. Hopefully it’s near the 3.3g that I need for 2.4 vols, according to the calculator. She’ll be right.

Once bottling was done I was about to start rigging up the necessary equipment to fill a 5 litre mini keg with sanitiser and then flush it with CO2 when I realised that, actually, this is just a really big bottle which will get drunk as soon as it’s carbonated in a week’s time. I still had the beer gun set up for bottling so I just used that, giving the keg a decent blast of gas and then filling it until I started seeing bubbles coming from the bucket. I couldn’t remember how low the dip tube was set and was keen to try my new filter, so I gave the spigot a clockwise turn until it started drawing liquid again. One or two lumps could then be seen making their way towards the Bouncer but not beyond, so I kept fiddling with the spigot until no amount of turning would result in more beer. That’s eight bottles and almost a 5 litre keg. Nice one!